BudgetBob's PAINTS + COATINGS 100% Solids Epoxy Floor Paints Superior, Fresh, Top Quality BudgetBob Coatings offers private label sales of epoxy paints and coatings from a respected, high-quality manufacturer! We sell concrete sealers, water-based epoxies, urethane topcoats, epoxy mortars, river rock binder, concrete patch/repair products and more. Our coatings are industrial, commercial grade products for professional use. |
LIABILITY NOTICE: ALL PURCHASERS ARE AGREEING THAT THEY HAVE READ AND UNDERSTOOD THIS!! It is buyer's responsibility to familiarize themselves with the use of 100% solid epoxies. Many variables can impact the final product results: SURFACE PREP, adequate mixing and proper application are needed. We have NO LIABILITY for any issues beyond providing you with a top-quality, first-run product from our manufacturer. By purchasing this product, you are indicating that you have read this, understand it, and are accepting any risk of use. TECH DATA AND MSDS are fully available upon request via email!!!!! IT IS YOUR RESPONSIBILITY TO REQUEST and THOROUGHLY READ THESE! WE can offer technical support of your questions, but we can NOT control all the application factors that may impact your floor results. This is an industrial/commercial grade product, that requires DUE DILIGENCE to use. BUDGETBOB ENTERPRISES LLC is not liable for dissatisfaction UNLESS due to manufacturing problem. NO warranties, NO Returns, NO guarantees. Not responsible for personal injury that may occur. REQUEST THE MSDS and tech data sheets! |
| Water-Based Epoxy Floor "set" for up to 300 sq. ft project (300 square feet/gallon approx coverage @ 2mils dry - one gallon 45% solids water-based epoxy for priming, one for build coat) 2 gallons of our 2-part, 45% solids, water-based epoxy in choice of colors 1 lb of paint chips for a light fleck (really, you'll probably want a few more lbs) 2 3/8 inch nap rollers 1 9 inch roller tool 1 small jiffy mixer 2 3 inch paint brushes 1 pair vinyl gloves 1 6 gallon bucket for mixing instruction sheet PRICE: 149.00 plus shipping (NJ AND PA, sales tax added as required by law). Ship approximate 25-60.00 depending on location, estimated! ADD anti skid, 1 pint, 8.00 more. ADD URETHANE TO PROTECT FROM CHEMICALS AND UV: $90.00 more. ADD extra paint chips: $6.50/lb! |
| OPTION TWO: 93% solids low viscosity Epoxy, up to 400 square feet coverage. Use this if you are wanting a higher solids/higher build floor, but need a less expensive option than 100% solids. This product is self-priming, covers the same square footage as the 100% solids, and gives a 6-12 mil floor in one coat. 133-270 square feet/gallon 1.5 gallon kit low-v; hi-solids epoxy 1 lb chips, your choice color, for a light fleck (you'll want a bit more,) 1 small jiffy mixer 1 1/4 inch roller cover 1 9-inch roller frame 1 6 gallon pail for mixing 1 3-inch paint brush 1 pair vinyl gloves instruction sheet COST: $135.00 plus shipping (Pa and NJ sales tax will be added). Ship approximate: 25-60.00 depending on location, estimate). ADD EXTRA PAINT CHIPS: $6.50/lb. ADD URETHANE : $90.00 more ADD ANTI skid 1 pint: $8.00 more |